Parshv Industries
Bhuleshwar, Mumbai, Maharashtra
GST No. 27AAQFP2836H1ZV
TrustSEAL Verified
Call 0804764263288% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Kilogram |
| Material Grade | 304,316,409,310,202,410,420,439,441 |
| Steel Grade | SS304 L, SS316 L, SS 304 |
| Type | ss |
| Surface Treatment | Hot Rolled, Coated |
| Brand | jindal, posco, sail |
| Size | 1250 x 6000, 1250 x 5000, 1250 x 2500. 1500 x 3000 |
| Material | STAINLESS STEEL |
| Usage/Application | Industrial |
| Shape | Square |
| Thickness | 1-2 mm, 2-3 mm |
| Standard | AISI, ASTM, JIS, DIN |
| C | Si | Mn | P | S | Cr | Mo | Ni | Others |
| 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 18.0-20.0 | - | 8.00-10.5 | - |
| Tensile Strength | 85(ksi), 586(Mpa) |
| Yield Strength 0.2% Offset | 42(290) |
| Elongation | 55% |
Product Details:
| Minimum Order Quantity | 1 Kilogram |
| Material | STAINLESS STEEL |
| Size | 1250 X 2500, 1250 X 5000, 1500 X 6000, 1500 X 3000 |
| Grade | SS 310, STAINLESS STEEL 310, STAINLESS STEEL 309, 309, 310 |
| Material Grade | 310, 309 |
| Thickness | 1-100MM |
| Length | AS PER YOUR REQUIRMENT |
| Steel Grade | SS 310S |
| Surface Treatment | Hot Rolled |
| Standard | ASTM |
| Shape | Rectangular |
| Certification | ISO |
| Usage/Application | HEAT TREATMENT, OIL & GAS |
| I Deal In | New Only |
| Application | Automobile Industry, Construction, Oil & Gas Industry, Pharmaceutical / Chemical Industry |
| C | 0.25 |
| Si | 1.50 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.030 |
| Cr | 24.0-26.0 |
| Mo | - |
| Ni | 19.0-22.0 |
| Others | - |
| Tensile Strength | 0.2% Offset Yield Strength | Elongation |
| 750000(psi), 515(Mpa) | 30000(psi), 205(Mpa) | 35% |
Product Details:
| Thickness | 1-100 |
| Type | Plate |
| Steel Grade | SS316 L |
| Size | As per your requirment |
| Material | stainles steel |
| Surface Treatment | Hot Rolled |
| Certification | ISO |
| C | 0.08 |
| Si | 1.00 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.030 |
| Cr | 16.0-18.0 |
| Mo | 2.0-3.0 |
| Ni | 10.0-14.0 |
| Others | - |
| Tensile Strength | Yield Strength | Elongation |
| 75 ksi(min) | 30 ksi(min) | 40% |
Product Details:
| Thickness | 1-100 |
| Type | Coil |
| Steel Grade | SS316 L |
| Size | as per you requirment |
| Material | stainless steel |
| Brand | jindal |
| Surface Treatment | Hot Rolled |
| Certification | ISO |
| C | 0.08 |
| Si | 0.75 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.030 |
| Cr | 16.0-18.0 |
| Mo | 2.00-3.00 |
| Ni | 10.0-14.0 |
| Others | Ti 5x(C+N)/0.70 |
| Tensile Strength | Yield Strength 0.2% Offset | Elongation |
| 75000psi, 515Mpa | 30000psi, 205Mpa | 35% |
Product Details:
| Thickness | 1-100MM |
| Width | 1250/1500 |
| Grade | 200 series, 400 series, 300 series |
| Material | STAINLESS STEEL |
| Standard | JIS G3109 |
| Length | AS PER YOUR REQUIRMENT |
| Finish | Unpolished, Polished |
| Brand | Jindal |
| C | 0.08 |
| Si | 1.00 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.030 |
| Cr | 18.0-20.0 |
| Mo | 3.00-4.00 |
| Ni | 11.0-15.0 |
| Others | - |
| Yield Strength 0.2% Offset | Ultimate Tensile Strength | Elongation |
| 30,000psi, 205MPa | 75,000psi, 515Mpa | 40% |
Product Details:
| Minimum Order Quantity | 1 Kilogram |
| Material Grade | SS 410 |
| Steel Grade | SS316 L, SS304 L, SS 304, SS200 |
| Thickness | 1-100 |
| Brand | JINDAL, SAIL |
| Size | AS PER YOUR REQUIRMENT |
| Material | STAINLESS STEEL |
| Usage/Application | AUTOMOBILE |
| Shape | Rectangular |
| Application | Automobile Industry, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry |
| C | 0.08 |
| Si | 1.00 |
| Mn | 1.00 |
| P | 0.040 |
| S | 0.030 |
| Cr | 11.5-13.5 |
| Mo | - |
| Ni | - |
| Others | - |
| UTS ksi (Mpa) | 0.2% YS ksi (Mpa) | Elongation |
| 65(448) | 40(276) | 25% |
Product Details:
| Minimum Order Quantity | 5 Kilogram |
| Thickness | 1-50 |
| Type | Plate |
| Material Grade | 904l |
| Shape | rectangular |
| Steel Grade | SS409 L |
| Size | 8 x 4 |
| Material | 904l |
| Brand | jindal |
| Surface Treatment | Hot Rolled |
| C | 0.020 |
| Si | 1.00 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.035 |
| Cr | 19.0-23.0 |
| Mo | 4.0-5.0 |
| Ni | 23.0-28.0 |
| Others | Cu 1.0-2.0 |
| Tensile Strength (Mpa) min | Yield Strength 0.2% Offset (Mpa) min | Elongation |
| 490 | 220 | 36% |
Product Details:
| Minimum Order Quantity | 10 Kg |
| Size | 1250X2500 MM |
| Thickness | 1-100MM |
| Material Grade | 409M / IRSM44 97 |
| Type | SS PLATE |
| Brand | JINDAL/SAIL |
| Steel Grade | SS 409M |
| Material | SS |
| Surface Treatment | Hot Rolled |
| Usage/Application | Industrial |
| Shape | Rectangular |
SS 409M and IRS M44 Plate which are most commonly used fabrication materials for the railway wagons due to its abundantly availability, low initial cost, easy to fabricate, cast and forge, good strength, easy to enhance properties by adding alloying elements and heat treatment, recyclable and eco-friendly. IRS M44 / SS 409M Stainless steel Plate has been a preferred material in railway applications worldwide on account of its longer life, higher strength to-weight ratio, aesthetic appearance & corrosion resistance. The most important benefit is that SS409M stainless steel is a sustainable material, after a long service life, there is very little loss of material due to corrosion.
Its durability and minimal maintenance requirements makes stainless steel a better choice economically. Benefitted by energy saving lightweight design and 100% recyclability at the end of service life, stainless steel can be qualified as environmental friendly material. Bright contemporary finish of stainless steel has further strengthened the applicability of stainless steel in rail industry. In addition, stainless steel does not require protective paint coatings which further reduce maintenance cost. For wagon application, we will be talking about only one utility grade stainless steel 1.4003, which has numerous local names in different countries. IRS M44 - 97 also supplied according to equivalent standards and specifications which are EN 10088-2 ASTM S40977, DIN X2Cr11, 3CR 12, F12N, IR - CK 201, X2CrNi12, SS409M.
Many stainless steel grades are in use in railways operations today. Austenitic stainless steel grades 301LN, 201, 301, 201LN and 304 have been used in the construction of railway coaches, while ferritic stainless steel 409M, IRS M44- 97 and X2CrNi12 have been used for freight wagons. Conquest Steel & Alloys is an experienced stainless steel plate supplier which can offer you IRSM 44 steel plate, SS409M steel plate, X2CrNi12 steel plate.
IRSM 44 Stainless Steel Plate Specification :Standard : ASTM, JIS, ASME, AISI, DIN,
Thickness range(in mm.) : 3 to 8 / 10 to 60
Width range(in mm.) : 700- < 1000, 1000- 1250
Specification : IRSM-44
Length : lenth based on the customer's requirement.
Processes : Forging, hot rolling and cold rolling
Tolerance : Tolerance shall conform to ASTM A480 of specification No. IRS:M44/97 for hot rolled sheets/plates. Tolerance on thickness for 5-8 mm thick hot rolled sheets/plates shall be in the limit + 0.5 mm to — 0.2 mm.
Additional Information:
Product Details:
| Thickness | >5mm, 0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm, 4-5 mm |
| Steel Grade | SS304 L |
| Surface Treatment | Coated, Hot Rolled, Cold Rolled |
| Type | Plate, Coil |
| C | 0.03 |
| Si | 0.75 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.030 |
| Cr | 18.0-20.0 |
| Mo | - |
| Ni | 8.00-12.0 |
| Others | - |
| Tensile Strength | Yield Strength 0.2% Offset | Elongation |
| 85(ksi), 585(Mpa) | 35(ksi), 290(Mpa) | 40% |
Product Details:
| Steel Grade | SS 304, SS304 L, SS316 L |
| Standard | JIS, AISI, DIN, ASTM |
| Thickness | 3-4 mm, >5 mm, 2-3 mm, 0-1 mm, 4-5 mm, 1-2 mm |
| C | 0.15 |
| Si | 1.00 |
| Mn | 5.50-7.50 |
| P | 0.060 |
| S | 0.030 |
| Cr | 16.0-18.0 |
| Ni | 3.50-5.50 |
| Others | N 0.25 |
| Tensile Strength, min | Yield Strength, min | Elongation |
| 75ksi | 38ksi | 40% |
Product Details:
| Application | Automobile Industry, Oil & Gas Industry |
| C | 0.08 |
| Si | 1.00 |
| Mn | 1.00 |
| P | 0.045 |
| S | 0.045 |
| Cr | 10.5-11.75 |
| Mo | - |
| Ni | 0.50 |
| Others | Ti 6xC/0.75 |
| Ultimate Tensile Strength, ksi | 0.2% Yield Strength, ksi | Elongation |
| 55min | 25min | 20% |
| C | 0.15 |
| Si | 1.50 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.030 |
| Cr | 16.0-18.0 |
| Mo | - |
| Ni | 6.00-8.00 |
| Others | N 0.10 |
| UTS ksi(Mpa) | 0.2% YS ksi (Mpa) | Elongation |
| 120(827) | 45(310) | 60% |
Product Details:
| Steel Grade | SS409 L |
| C | 0.08 |
| Si | 1.00 |
| Mn | 1.00 |
| P | 0.040 |
| S | 0.030 |
| Cr | 11.5-13.5 |
| Mo | - |
| Ni | - |
| Others | - |
| UTS ksi (Mpa) | 0.2% YS ksi (Mpa) | Elongation |
| 65(448) | 40(276) | 25% |
Product Details:
| Type | Plate |
| Material Grade | stainless steel |
| Grade | 300 series |
| Steel Grade | 347 |
| Size | 1000 - 6000 |
| Thickness | 1-1000 |
| Width | 1250/1500 |
| Brand | JSP |
| Material | stainless steel |
| Length | 2500 - 6000 |
| C | 0.08 |
| Si | 1.00 |
| Mn | 2.00 |
| P | 0.045 |
| S | 0.030 |
| Cr | 17.0-19.0 |
| Mo | - |
| Ni | 9.00-13.00 |
| Others | Nb+Ta 10xCmin |
| Yield Strength 0.2% Offset | Ultimate Tensile Strength | Elongation |
| 30,000psi, 205Mpa | 75,000psi, 515Mpa | 4 |
4.2/5
Reviewed by 10 Users
Most Relevant Reviews
Response from Seller
sorry for inconvenience.