Parshv Industries
Bhuleshwar, Mumbai, Maharashtra
GST No. 27AAQFP2836H1ZV
TrustSEAL Verified
Call 0804764263289% Response Rate
SEND EMAIL
Product Details:
| Size/Diameter | 1/2 inch |
| Diameter | 1 inch |
| Shape | Round |
| Grade | GR2 |
| Usage/Application | Manufacturing |
| Country of Origin | Made in India |
Product Details:
| Material | TANTALUM |
| Usage/Application | Chemical Handling |
| Size/Diameter | 1" |
| Application | Drinking Water, Utilities Water, Chemical Handling, Gas Handling, Food Products |
| Single Piece Length | 3 meter |
| Shape | Round |
| End | Plain End |
| Application | Drinking Water, Utilities Water, Chemical Handling |
| Single Piece Length | 3 meter, 6 meter, 18 meter |
| Size/Diameter | 1/2 inch, 1 inch, 2 inch |
We hold expertise in supplying a wide range of Tantalum Tubes. These pipes are widely demanded by various clients owing to finest quality and consistent performance. With the availability in various thickness and dimensions, these pipes are widely used in various engineering and other industries. Besides, we also provide these pipes in customized specifications as per the demands. Customers can avail these products at cost effective rates.
Features:
Product Details:
| Wire Gauge | 10 SWG |
| Material | Tantalum |
| Length | AS PER REQUIRMENT |
| Diameter | AS PER REQUIRMENT |
| Country of Origin | Made in India |
| Physical Properties | Tantalum | |
| Atomic Number | 180.95 | |
| Density | 16.6 g/cc | |
| Melting Point | 3290 K, 2996°C, 5462°F | |
| Boiling Point | 5731 K, 6100°C, 9856°F | |
| Coefficient of Thermal Expansion (20°C) | 6.5 x 10(-6) / °C | |
| Electrical Resistivity (20°C) | 13.5 micro ohms-cm | |
| Electrical Conductivity | 13% IACS | |
| Specific Heat | 036 cal/g/°C | |
| Thermal Conductivity | 13 cal/cm(2)/cm°C/sec | |
| Annealed | Tensile Strength | 285 MPa (41 ksi) |
| Yield Strength | 170 MPa (25 ksi) | |
| % Elongation | 30%+ | |
| %Reduction in Area | 80%+ | |
| Cold Worked | Ultimate Tensile | 650 MPa |
| Strength | (95 ksi) | |
| % Elongation | 0.05 | |
| Hardness | Annealed | 90 HV |
| Cold Worked | 210 HV | |
| Poisson's Ratio | 0.35 | |
| Strain Hardening Exponent | 0.24 | |
| Elastic Modulus Tension | 186 G Pa (27x10(-6) psi) | |
| Ductile Brittle Transition Tem | < 75°K | |
| Recrystallization Tem | 900-1200°C | |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Usage/Application | Gas Pipe |
| Material | TANTALUM |
| Type | Brass, Copper, Steel |
| Size | 1/2 inch, 1 inch, 3/4 inch |
| Application | Structure Pipe, Gas Pipe, Hydraulic Pipe |
Tantalum is a material with attractive high-temperature mechanical properties, high density, high strength, good toughness, strong stiffness, and excellent corrosion resistance in many acids.
Tantalum is available as pure or as an alloy. The three most common tantalum alloys are 90Ta-10W, 97.5Ta-2.5W tantalum, and 60Ta-40Cb.
90-10 contains 10% tungsten. This is the most common alloy of all. This alloy’s high melting-point combined with its favorable mechanical properties makes it a nice selection for difficult corrosive environments.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Kilogram |
| Brand | IMPORTED |
| Size/Diameter | 1-10 |
| Single Piece Length | 6 meter, 3 meter |
| Grade | GR-1 |
| Material | TANTALUM |
| Usage | Construction, Household Repair, Manufacturing |
| Usage/Application | Manufacturing |
| Shape | ROUND |
| Single Piece Length | 3 meter, 6 meter |
| Size/Diameter | 1/2 inch, 1 inch, 2 inch |
Product Details:
| Minimum Order Quantity | 1 Kilogram |
| Brand | IMPORTED |
| Single Piece Length | 3 meter, 6 meter |
| Size/Diameter | 1/2 inch, 2 inch, 3 inch, 4 inch, 1 inch, >4 inch |
| Grade | GR-1 |
| Material | TANTULAM |
| Usage/Application | Manufacturing |
| Dimension | 1-10 |
| Shape | ROUND |
| Thickness | 1-10 |
Product Details:
| Material | Titanium |
| Product Type | Coil |
| Application | Drinking Water, Chemical Handling, Gas Handling, Utilities Water, Food Products |
| Single Piece Length | 3 meter, 6 meter |
| Size/Diameter | 4 inch, 1/2 inch, 2 inch, >4 inch, 1 inch, 3 inch |
| Color | Silver |
We hold expertise in supplying a wide range of Tantalum Pipes. These pipes are widely demanded by various clients owing to finest quality and consistent performance. With the availability in various thickness and dimensions, these pipes are widely used in various engineering and other industries. Besides, we also provide these pipes in customized specifications as per the demands. Customers can avail these products at cost effective rates.
We hold expertise in supplying a wide range of Tantalum Pipes. These pipes are widely demanded by various clients owing to finest quality and consistent performance. With the availability in various thickness and dimensions, these pipes are widely used in various engineering and other industries. Besides, we also provide these pipes in customized specifications as per the demands. Customers can avail these products at cost effective rates.
Tantalum & Tantalum - Tungsten Pipes
Material Grade: RO5200,RO5400, RO5252 (Ta-2.5W), RO5255 (Ta-10W)
Tantalum tubes Tantalum- tungsten alloy tubes
Size: Dia 1mm to 150mm OD
Thickness: 0.2mm - 50mm
Length - 100mm to 12000mm
Standard:As per ASTM B521-98
Features: